Gongyi City Xinhua Machinery Factory Cinder machine new machine Running Notes: First, the new machine Running Notes: 1, the new machine running-in period requirements: Li claw excavator life and the early use of a great relationship, engine undercarriages and hydraulic systems have a running-in process, to improve the life of the machine at the beginning of the new machines use (excavation work 50 hours) should strictly adhere to the following requirements: 1) The preparation before the run: (1) Check the components connected to the machine installation It is solid. (2) the attachment is complete. (3) damage. (4) Check the oil spill all loose fittings. (5) Check the tire pressure is normal. (6) Check the vehicle brake situation. (7) Check motors, diesel engines, hydraulic pumps, hydraulic motors without exception. (8) required to add fuel, hydraulic oil, check the brake fluid. (9) Check the battery electrolyte and battery connections. 2) run-run-run load content from 70% to 80% of rated, engine speed not less than 1200 rev / min. Run-in including mining haul, walking, climbing, and all the action. 2, after the run is completed: (1) Replace the engine, drive axle lubricants and hydraulic system hydraulic oil tunnel construction machinery manufacturers, and clean the tank, clean the filter tunnel construction machinery, replacement of precipitated oil and hydraulic oil ; check the brake fluid. (2) conduct a maintenance level (see the contents of a guarantee). (3) hydraulic system replacement after 500 hours of hydraulic oil. Gongyi City Xinhua Machinery Factory driving and operation: proper driving and operating to improve efficiency, reduce fuel and ensure backhoe loaders in good working condition have a great relationship. While effectively extend the service life of the machine. (A) a diesel engine operation, engine starting (1) should be checked before the start of fuel, lubricating oil and cooling water is sufficient, the hydraulic system of the engine, brake system for leaks, leaks, oil spills and other anomalies. All of the above exclude abnormalities. (2) the shift lever in the neutral position. (3) the throttle lever in the center position. The electric lock switch clockwise toggle power tunnel boring machine, the engine speed increased rapidly, with inertial crankshaft flywheel energy at higher speeds, the engine can be started. When the engine starter will switch back to the original position, so as not to damage the engine gears. Noted: ① not more than 15 seconds each time you start, if one can not start interval of 2 minutes after the start of tunnel construction machinery harrow slag to protect the starter and the battery. ② not start the engine speed. If three consecutive still can not start, it should identify the reasons for troubleshooting. After engine start, it should lock switch on the electric power position. The move to the battery charging switch direction. (4) can be raised or other method for preheating hot water preheat engine starting difficulties in the winter cold. 2, backhoe loaders and work began walking (1) after the engine starts, keep the speed stable operation until the system pressure is normal, you can start or begin excavation work. (2) Avoid parking on an incline, the parking should be added to prevent skids roadway backhoe to slip under the wheels. DANGER: When reversing backwards, need confirmation, no personnel and obstructions. Tunnel boring machine, Shuozhou tunnel construction machinery, provided by the Yellow River diversion project, Xinhua Machinery Factory of Gongyi City. Gongyi City Xinhua Machinery Factory (www.gyxinhua.com) strong, credible, in Zhengzhou, Henan handling equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Xinhua machinery into the brilliant and you work for a better future!